?2005 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729-4681 phone (631) 586-7600 ? fax (631) 242-9798 ? www.sensitron.com ? sales@sensitron.com ? sensitron semiconductor technical data data sheet 4322, rev. a hermetic power mosfet n-channel shd231006s -- s-100 (jantx level room temp) screening per sensitron datasheet features: ? 60 volt, 3.0 ohm, 0.25 a mosfet ? isolated hermetic, ceramic package ? fast switching ? low r ds (on) maximum ratings all ratings are at t c = 25 c unless otherwise specified. rating symbol min. typ. max. units drain to source voltage v ds - - 60 volts gate to source voltage v gs - - 20 volts on-state drain current @ t c = 25 c i d (on) - - 0.25 amps pulsed drain current @ t c = 25 c i dm - - 1.3 amps operating and storage temperature t op /t stg -55 - +150 c total device dissipation @ t c = 25 c p d - - 2.5 w thermal resistance, junction to case r thjc - - 50 c/w electrical characteristics drain to source breakdown voltage v gs = 0v, i d = 10 a bv dss 60 - - volts on-state drain current v ds = 7.5v, v gs = 10v pulse width = 300 s, duty cycle 2% i d(on) - 0.8 - amp static drain to source on state resistance pulse width = 300 s, v gs = 10v, i d = 500ma duty cycle 2% v gs = 5v, i d = 200ma r ds(on) - - 3.0 4.0 gate threshold voltage v ds = v gs , i d = 250 a v gs(th) 1.0 - 2.5 volts forward transconductance v ds = 15v, i d = 200ma g fs - 250 - s(1/ ) zero gate voltage drain current v ds = 60v, v gs = 0v v ds = 60v, v gs = 0v, t c = 125 c i dss - - 1 500 a gate to source leakage forward v gs = 15v gate to source leakage reverse v gs = -15v v ds = 0v i gss - - 1 -1 a total gate charge v ds = 30v, gate-source charge v gs = 10v, gate-drain charge i d = 250ma q g q gs q gd 0.4 0.06 0.06 0.6 nc turn on delay time v dd = 25v, rise time i d = 150ma, turn off delay time fall time t d(on) t r t d(off) t f - 7.5 6.0 7.5 3.0 20 20 nsec input capacitance v gs = 0 v, output capacitance v ds = 25 v, reverse transfer capac itance f = 1.0mhz c iss c oss c rss - 25 6.0 1.2 - pf shd231006
?2005 sensitron semiconductor ? 221 west industry court ? deer park, ny 11729-4681 phone (631) 586-7600 ? fax (631) 242-9798 ? www.sensitron.com ? sales@sensitron.com ? sensitron technical data data sheet 4322, rev. a mechanical dimensions: in inches / mm pinout table device type pin 1 pin 2 pin 3 n channel fet gate source drain shd231006 3 21 .125 .115 (3.18 2.92 ) .079 .071 (2.01 1.81) .024 .016 (.61 .41) .0125 typ (.318 ) .105 .095 (2.68 2.41) .036 .024 (.91 .61) .093 .087 (2.37 2.21) . 0 54 .045 (1.370 1.160) .012(.30) r .008(.20) r typ 3 places lcc-3 disclaimer: 1- the information given herein, includi ng the specifications and dimensions, is subject to change without prior notice to improve product characteristics. before ordering, purchasers are advised to c ontact the sensitron semiconductor sales department for the latest version of the datasheet(s). 2- in cases where extremely high reliab ility is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of user s? fail-safe precautions or other arrangement . 3- in no event shall sensitron semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user?s units according to the datasheet(s). sensitron semiconductor assumes no responsibility for any intellectual property claims or any other pr oblems that may result from applications of information, products or circuits de scribed in the datasheets. 4- in no event shall sensitron semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- no license is granted by the datasheet (s) under any patents or other rights of any third party or sensitron semiconductor. 6- the datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of sensitron semiconductor. 7- the products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and sa fety nor are they to be applied to that purpose by their direct purchasers or any third party. when exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
|
